Code No. B2548 Calibration not completed


TROUBLE JUDGEMENT


When the camera-ECU has not been calibrated, diagnosis code No. B2548 will be set.
note
  • "!" mark is displayed against the camera, which has not been calibrated yet, when diagnosis code No.B2548 is set.
  • Diagnosis code No. B2548 will be erased automatically after learned values are written to the camera-ECU successfully or a relevant camera has been calibrated.

PROBABLE CAUSES



DIAGNOSIS PROCEDURE


Check whether the diagnosis code is set again.


Calibrate the camera-ECU, and check again if the diagnosis code is set in the camera-ECU.
(1)Calibrate the camera-ECU (Refer to ).
(2)Turn the ignition switch from "LOCK" (OFF) position to "ON" position.
(3)Check if diagnosis code is set.

Q. Is the diagnosis code set?

Repeat the calibration (Refer to ).

The procedure is complete.