|
1.Press the multi around
monitor operation switch to display the bird’s
eye-view/front-view.
2.Press and hold the multi
around monitor operation switch for at least 1.5 seconds
to enter the colour selection mode.
3.Press the
multi around monitor operation switch until the desired
colour appears on
the display.
| note |
- Each time you press the multi around
monitor operation switch, the colour of
vehicle
icon in the bird’s eye-view will
change to the next one.
- When the following conditions are met,
the colour of vehicle icon does not
change
and the colour selection mode is
canceled.
- Shift lever is moved to the
reverse position.
<M/T>
- Selector lever is moved to
the "R" position.
<A/T>
- You do not operate anything
for 30 seconds.
- Ignition switch is turned
to the "LOCK" (OFF)
position.
|
4.When the colour of vehicle icon is changed
to the desired colour, press and hold the
multi around monitor operation switch for a few seconds to
exit the colour selection mode.
|
|
|
Using the customisation function of
multi around monitor in M.U.T.-III, the colour of
vehicle icon can be changed. The customisation information
is held even when the battery is disconnected.
|