![](../../../img/54/ACB04903AB00ENG.png)
|
1.
caution |
The removed clock spring
should be stored in a clean,
dry place.
|
Lift the connector lock of clock spring connector to
the direction of the arrow, then
unlock and disconnect the connector.
|
![](../../../img/54/ACF01061AB00ENG.png)
|
2.Using a pliers or similar
tool, pinch and lift the band clump pin shown in the
figure.
|
![](../../../img/54/ACF01621AC00ENG.png)
|
3.With the flat-tipped
screwdriver inserted into the column shaft groove shown in
the figure,
lift the claw shown in Section A - A, and then remove
the column switch assembly by
pulling out the column switch assembly.
|
|
Refer to GROUP 52B -
Driver’s Air Bag Module and Clock Spring .
|
![](../../../img/54/ACF01059AC00ENG.png)
|
1.Using a pliers or similar
tool, pinch and lift the band clump pin shown in the
figure. 2.Align the part "A" position in the
figure with the steering lock side rib, and then
insert the column switch assembly into the column
shaft. 3.After mounting the column switch assembly
by securely fitting the column switch assembly
claw with the column shaft groove, release the band clump
pin.
|