RADIO AND CD PLAYER REMOVAL AND INSTALLATION

note

When the radio and CD player is replaced, always turn the ignition switch to the "ON" position once and then carry out the operation check.

Pre-removal and post-installation OperationInstrument Centre Panel Assembly Removal and Installation (Refer to GROUP 52A - Instrument Centre Panel

		Removal Steps
	1.	Radio and CD player/Bracket
	2.	Bracket (LH/RH)
>>A<<	3.	Radio and CD player

INSTALLATION SERVICE POINT

>>A<< RADIO AND CD PLAYER INSTALLATION

The connectors, antenna and cables connected to the radio and CD player are shown in the figure.