REMOVAL AND INSTALLATION

caution

Refer to GROUP 52B, Service Precautions and Passenger’s (front) Air Bag Module before removing the passenger’s (front) air bag module.

note

When the multivision display is replaced, always turn the ignition switch to the "ON" position once and then carry out the operation check.

Pre-removal and post-installation OperationInstrument Centre Panel Assembly Removal and Installation (Refer to GROUP 52A - Instrument Centre Panel).

		Removal steps
	1.	Multivision display and bracket
	2.	Bracket
	3.	Gateway-ECU (for smartphone link display audio)
	4.	Gateway-ECU (for smartphone link display audio) harness
>>A<<	5.	Multivision display
	·	Passenger’s (front) air bag module (Refer to GROUP 52B - Passenger’s (front) Air Bag Module.)
	6.	GPS antenna

INSTALLATION SERVICE POINT

>>A<< MULTIVISION DISPLAY INSTALLATION

The connectors, antenna and cables connected to the multivision display are shown in the figure.