|
(1)Start the multivision display.
|
|
(2)On the "Home" screen, to select "Day/Night Setting."
|
|
Set "Day/Night Setting" to "Auto."
|
|
|
|
When the tail lamps are turned on, check whether the illumination other than the multivision display is turned on.
|
|
Q.
Is the check result normal?
|
|
Check the rear combination lamp troubleshooting.
|
|
|
|
Q.
Is the check result normal?
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
When the rheostat knob is operated with the mechanical switch illuminated, the illumination should be changed.
|
|
Q.
Is the check result normal?
|
|
Diagnose the combination meter.
|
|
|
|
Q.
Is the check result normal?
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
Substitute the ETACS-ECU with good one. When the tail lamps illuminate, check that the illumination of the multivision display is switched from day mode to night mode.
|
|
Q.
Is the check result normal?
|
|
Replace the multivision display (Refer to ).
|
|
|