Inspection Procedure 4: When the SPEECH switch is pressed, the voice guide is not output.



caution Before replacing the hands free-ECU or radio and CD player or multivision display, ensure that the power supply circuit, the earth circuit and the communication circuit are normal.

COMMENTS ON TROUBLE SYMPTOM


If the voice guide is not sent when the steering wheel voice control switch (SPEECH switch) is pushed, the communication between the radio and CD player or multivision display and the hands free-ECU, or the communication between the radio and CD player or multivision display and the steering wheel remote control switch, the hands free-ECU or the steering wheel remote control switch may have a problem.

PROBABLE CAUSES




DIAGNOSIS PROCEDURE


STEP 1. Check the diagnosis mode.


<Vehicles with radio and CD player>
<Vehicles with MMCS>

Q. Is the check result normal?

Go to Step 2.

Perform Inspection Procedure 5: DIAGNOSIS MODE cannot be made an entry. Mobile Phone item is not displayed. (Refer to .)

STEP 2. Operation check of the steering wheel remote control switch (audio remote control switch).


Check that the radio and CD player or multivision display can be operated by the steering wheel audio remote control switch.

Q. Is the check result normal?

Go to Step 3.

Troubleshoot the steering wheel remote control switch.

STEP 3. Check the steering wheel remote control switch (SPEECH switch).


Check the continuity of the steering wheel remote control switch (Refer to ).

Q. Is the check result normal?

Go to Step 4.

Replace the steering wheel remote control switch.

STEP 4. Temporarily replace the hands free-ECU, and check the trouble symptom.


Q. Is the check result normal?

Replace the hands free-ECU.

Replace the radio and CD player or multivision display.