DAYTIME RUNNING LAMP (ON FRONT BUMPER) REMOVAL AND INSTALLATION

Pre-removal Operation

Front Fog Lamp Bezel Removal (Refer to GROUP 51 - Front Bumper Assembly ).

Post-installation Operation

Front Fog Lamp Bezel Installation (Refer to GROUP 51 - Front Bumper Assembly ).
Front Fog Lamp Aiming Adjustment (Refer to ).

			Removal steps
	>>A<<	1.	Front fog lamp assembly
<<A>>		2.	Front fog lamp bulb
<<A>>		3.	Daytime running lamp bulb
		4.	Front fog lamp unit

REMOVAL SERVICE POINT

<<A>> FRONT FOG LAMP BULB/DAYTIME RUNNING LAMP BULB REMOVAL

caution

Do not touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, immediately clean it with alcohol or thinner. After drying completely, install the bulb.

INSTALLATION SERVICE POINT

>>A<< FRONT FOG LAMP ASSEMBLY INSTALLATION

Tighten the mounting screws to the specified torque in the order shown.
Tightening torque: 2.5 ± 0.3 N·m