REMOVAL AND INSTALLATION

<Vehicles with halogen type headlamp>

Pre-removal Operation

Front Fog Lamp Bezel Removal.

Post-installation Operation

Front Fog Lamp Bezel Installation.

			Removal steps
	>>A<<	1.	Daytime running lamp assembly
<<A>>		2.	Daytime running lamp bulb
		3.	Daytime running lamp unit

REMOVAL SERVICE POINT

<<A>> DAYTIME RUNNING LAMP BULB REMOVAL

caution

Do not touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, immediately clean it with alcohol or thinner. After drying completely, install the bulb.

INSTALLATION SERVICE POINT

>>A<< DAYTIME RUNNING LAMP ASSEMBLY INSTALLATION

Tighten the mounting screws to the specified torque in the order shown.
Tightening torque: 2.5 ± 0.3 N·m