DATA LIST REFERENCE TABLE




The following items can be read by the M.U.T.-III from the e-Call control unit input data.
Item No.
M.U.T.-III display
Check condition
Normal condition
1
e-Call switch status

  • Ignition switch: ON
  • e-Call switch: ON

ON

  • Ignition switch: ON
  • e-Call switch: OFF

OFF
2
Telephone reception level

  • Ignition switch: ON
    note Park the vehicle in an open area where radio wave is not shielded.

-106.7 dBm or more
3
GPS/GLONASS reception satellite

  • Ignition switch: ON
    note Park the vehicle in an open area where radio wave is not shielded.

4 pieces or more
4
e-Call battery voltage

  • Ignition switch: ON

System voltage
5
e-Call battery life

  • Ignition switch: ON
    note If you fail to execute "Reset" and "e-Call batt. time counter reset" on the special function when you replace the e-Call battery, "less than one year" may be displayed regardless of the battery age.

Less than 1 year
1 to 2 years
2 to 3 years
3 to 4 years
More than 4years
Measure failed
6
Audio amplifier judgment
Without audio amplifier
Not present
With audio amplifier
Present
7
Microphone relay
The microphone is not used.
OFF
The microphone is used.
ON
8
e-Call speaker relay
The e-Call speaker is not used.
OFF
The e-Call speaker is used.
ON
9
Door speaker relay
The door speaker is not used.
OFF
The door speaker is used.
ON