![](../../../img/54/ACC03841AD00ENG.png)
|
1.Press the "A" section on
the menu screen for at least five seconds.
|
![](../../../img/54/ACE02821AA00ENG.png)
|
2.The dealer mode will be
initiated. Then "Dealer" screen will be displayed.
|
|
If the operations below are done,
the dealer mode will be terminated.
|
|
- If "Back" button is selected on "Dealer" screen,
the dealer mode
will terminate and then return to the previous
screen.
|
|
The following items can be checked
or set in the dealer mode.
|
|
- Select Model
- Check Connectivity
- Guideline Settings
- Import Vehicle Type Data
- Speaker Check
- Version Information
|
![](../../../img/54/ACE02821AA00ENG.png)
|
1.Select "Select Model" on
the dealer mode screen.
|
![](../../../img/54/ACF02435AB00ENG.png)
|
2.The vehicle name is
displayed. Select "KS0W/KR0W PAJERO SPORTS" button.
|
![](../../../img/54/ACE02821AA00ENG.png)
|
1.Select
"Check Connectivity" on the dealer mode screen.
|
![](../../../img/54/ACE02845AA00ENG.png)
![](../../../img/54/ACE02850AA00ENG.png)
|
2."Check connectivity"
screen will be displayed. GPS
- Check whether the GPS antenna is connected.
If a
GSP antenna connection is recognised,
"Connection present" will be displayed. If
it cannot be recognised, "No connection" will be
displayed.
- Press "GPS" button to display how the GPS signal are
received on the GPS position screen.
Speed Sensor
- Displays whether the vehicle speed signal is
received.
If the vehicle speed signal is received
from the combination meter during driving, "OK"
will be displayed. If it cannot be received, "---"
will be displayed.
Back Sensor
- Check whether the inhibitor switch is
connected.
If the R position signal is received
when the selector lever is moved to the "R"
position,
"OK" will be displayed. If it cannot be received,
"---" will be displayed.
Gyro Sensor
- Displays how the gyro sensor incorporated in the
multivision display is.
If the gyro sensor is
normal, "OK" will be displayed. If the gyro sensor
is not abnormal,
"---" will be displayed.
Illumination
- Displays whether the illumination signal is
received.
"OK" will be displayed when the rain
light sensor determines that it is night time. If
it cannot be received, "---" will be
displayed.
Rear Camera
- Displays whether the rear view camera is
connected.
If the rear view camera connection is
recognised, "OK" will be displayed. If it cannot
be recognised, "---" will be displayed.
Steering RC(MODE)
- Displays how "MODE" switch on the steering wheel
audio remote control switch is
operated.
"OK" will be displayed when "MODE"
switch on the steering wheel audio remote control
switch
is pressed. If it cannot be received, "---" will be
displayed.
RSES
- Displays whether the rear display is
connected.
If the rear display connection is
recognised, "OK" will be displayed. If it cannot be
recognised, "---" will be displayed.
Premium Amp
- Displays whether the audio amplifier is
connected.
If the audio amplifier connection is
recognised, "OK" will be displayed. If it cannot
be recognised, "---" will be displayed.
Multi Camera
- Displays whether the C-ON and CMSW line is connected
between the MMES and the
camera-ECU.
- Turn the ignition switch to the "ON"
position.
- Operate the multi around monitor
operation switch.
- If the system recognises that the MMES
is connected with the camera-ECU on the C-ON
and CMSW line, "OK" will be displayed.
|
![](../../../img/54/ACE02821AA00ENG.png)
|
1.Select
"Guideline Settings" button on the dealer mode
screen.
|
![](../../../img/54/ACE02846AA00ENG.png)
![](../../../img/54/AC904941AD00ENG.png)
|
2.Draw base lines 0.5 m
behind the vehicle and width +0.4 m (+0.2 m each
for right and left) and align the guide line over the base
lines.
|
|
1.Adds vehicle information
stored in a SD card.
|
![](../../../img/54/ACE02821AA00ENG.png)
|
1.Select "Speaker Check"
button on the dealer mode screen.
|
![](../../../img/54/ACE02847AA00ENG.png)
|
2."Speaker Check" screen
will be displayed. Press "TEST TONE" button to display, the
speakers
outputs from each speaker automatically.
|
![](../../../img/54/ACE02821AA00ENG.png)
|
1.Select
"Version Information" button on the dealer mode
screen.
|
![](../../../img/54/ACF02640AA00ENG.png)
|
2."Version Information"
screen will be displayed.
|