|
1.To drain and charge the
refrigerant, it is recommended that the following recovery
equipment
is used.
- Type refrigerant recovery equipment (part number:
MZ999999)
Follow the recovery equipment
manufacturer’s instructions on draining and
charging
the refrigerant.
|
|
2.The following commercial
tools are recommended for charging the refrigerant and
measuring
the refrigerant pressure.
- Gas charging set [part No.
(R134a)]
- Gas charging set case (part No. -2)
- Gauge manifold (part No. -1)
- Service valve
- Adapter valve (part No. -3)
| note |
Tightening the adapter
valve handle (turning clockwise) opens
the valve, and loosening
it (turning anticlockwise) closes the
valve.
|
- Quick joint (for low-pressure) (part No. L)
- Quick joint (for high-pressure) (part No.
H)
- Charging hose (red - part No. -1)
- Charging hose (blue - part No. -2)
- Charging hose (yellow - part No. -3)
- Vacuum pump
- Vacuum pump adapter
|