HOW TO USE THIS
MANUAL
SCOPE OF MAINTENANCE,
REPAIR AND SERVICING EXPLANATIONS
This manual provides
explanations, etc. concerning procedures for the inspection,
maintenance,
repair and servicing of the subject model.
ON-VEHICLE SERVICE
"On-vehicle Service" is procedures for
performing inspections and adjustments of particularly
important locations with regard to the construction and for maintenance
and servicing, but other
inspection (for looseness, play, cracking, damage, etc.) must also be
performed.
INSPECTION
Under this title are presented inspection and
checking procedures to be performed by using special
tools and measuring instruments and by feeling, but, for actual
maintenance and servicing procedures,
visual inspections should always be performed as well.
DEFINITION OF TERMS
STANDARD VALUE
Indicates the value used as the standard for
judging the quality of a part or assembly
on inspection or the value to which the part or assembly is corrected
and adjusted. It is given
by tolerance.
LIMIT
Shows the standard for judging the quality of a part
or assembly on inspection and means
the maximum or minimum value within which the part or assembly must be
kept functionally or
in strength. It is a value established outside the range of standard
value.
REFERENCE VALUE
Indicates the adjustment value prior to
starting the work (presented in order to facilitate
assembly and adjustment procedures, and so they can be completed in a
shorter time).
DANGER, WARNING, AND CAUTION
DANGER, WARNING, and CAUTION
call special attention to a necessary action or to an action
that must be avoided. The differences among DANGER, WARNING, and CAUTION
are as follows:
- If a DANGER is not followed, the result is severe bodily harm or
even death.
- If a WARNING is not followed, the result could be bodily
injury.
- If a CAUTION is not followed, the result could be damage to the
vehicle, vehicle
components or service equipment.
INDICATION OF TIGHTENING
TORQUE
Tightening torques (units: N·m) are set to take
into account the central value
and the allowable tolerance. The central value is the target value, and
the allowable tolerance
provides the checking range for tightening torques.
MODEL INDICATIONS
The following
abbreviations are used in this manual for identification of model
types.
2400Indicates an engine with the 2,351 mL <4G64>
petrol engine.2500Indicates an engine with the 2,477mL
<4D56> diesel engine.2400Indicates an engine with the
2,442mL <4N15> diesel engine.2WDIndicates the 2-wheel drive
vehicles.4WDIndicates the 4-wheel drive vehicles.A/CIndicates the
air conditioner.A/TIndicates the automatic transmission.DOHC
Indicates an engine with the double overhead camshaft.MPI Indicates an
engine with the multi point injection.M/TIndicates the manual
transmission.SOHC Indicates an engine with the single overhead
camshaft.
EXPLANATION OF MANUAL
CONTENTS
![](../../../img/00/AC311238AE00ENG.png)
![](../../../img/00/AC509265AF00ENG.png)