![](../../../img/11/ACE00805AC00ENG.png)
![](../../../img/11/ACE00807AC00ENG.png)
|
1.Before inspection, set the
vehicle to the pre-inspection condition. 2.Turn
the ignition switch to the "LOCK" (OFF) position and then
connect the M.U.T.-III to the diagnosis connector.
|
![](../../../img/11/AK600247AB00ENG.png)
|
3.Disconnect the ventilation
hose from the positive crankcase ventilation (PCV) valve,
and connect a vacuum gauge to the ventilation
hose. 4.Plug the PCV valve. 5.Start the
engine and check that idle speed is within the standard
valve. Standard value: 720 ± 100
r/min 6.Check the intake manifold
vacuum. Limit: Minimum 60
kPa 7.Turn the ignition switch to the
"LOCK" (OFF) position. 8.Disconnect the vacuum
gauge and then connect the ventilation
hose. 9.Disconnect the M.U.T.-III.
|