|
1.With the hose installed,
remove the power steering oil pump assembly from the
bracket.
|
|
2.After removing the power
steering oil pump assembly, secure it with a cord in the
location where the removal and installation of the engine
assembly cannot be hindered.
|
|
1.With the hose installed,
remove the A/C compressor and clutch assembly from
the bracket.
|
|
2.After removing the
A/C compressor and clutch assembly, secure it with a
cord
in the location where the removal and installation of the
engine assembly cannot be hindered.
|
![](../../../img/11/AC308604AD00ENG.png)
|
caution |
Do not remove the flywheel
bolt. If this bolt is removed, the flexible
flywheel will become
out of balance and damaged <High power
engine>.
|
2WD: Refer to GROUP 22A - Transmission
Assembly . 4WD:
Refer to GROUP 22A - Transmission Assembly .
|
|
1.Check that all cables,
hoses and wiring harness connectors are disconnected from
the
engine
|
|
2.Lift the special tool
sling chain set (MB991683) and chain block slowly to remove
the engine assembly upwards from the engine
compartment.
|
|
1.Use special tool sling
chain set (MB991683) and chain block to lift the engine
assembly
in the same manner as removal.
|
|
2.Install the engine
assembly, being careful not to pinch the cables, hoses or
wiring
harness connectors.
|