|
1.With the hose installed,
remove the power steering oil pump assembly from the
bracket.
|
|
2.After removing the power
steering oil pump assembly, secure it with a cord in the
location where the removal and installation of the engine
assembly cannot be hindered.
|
|
1.With the hose installed,
remove the A/C compressor and clutch assembly from
the bracket.
|
|
2.After removing the
A/C compressor and clutch assembly, secure it with a
cord
in the location where the removal and installation of the
engine assembly cannot be hindered.
|
![](../../../img/11/ACE02494AB00ENG.png)
![](../../../img/11/ACE02645AB00ENG.png)
|
1.Install special tool
engine hanger plate (MB991956) to the cylinder
head.
|
![](../../../img/11/ACE02646AA00ENG.png)
|
2.Using the chain block,
lift the engine assembly up to where no load is applied to
the
front engine support insulator. 3.Remove the
engine mounting bolts. 4.Check that all cables,
hoses and wiring harness connectors are disconnected from
the
engine. 5.Lift the chain block slowly to remove
the engine assembly upwards from the engine
compartment. 6.Remove the engine assembly, and
then remove the starter assembly from the engine
assembly.
|
|
1.Use the chain block to
lift the engine assembly in the same manner as
removal.
|
|
2.Install the engine
assembly, being careful not to pinch the cables, hoses or
wiring
harness connectors.
|