|
1.Remove the oil pan
mounting bolts.
|
![](../../../img/11/AC504256AB00ENG.png)
![](../../../img/11/AC104547AC00ENG.png)
|
2.
caution |
Do not use special tool oil
pan FIPG cutter (MD998727) in area A of the
oil pan. Using the special tool in area A may
cause deformation of the front case because the
front case is made of aluminium.
|
Tap the special tool into the range (B) between the
cylinder block and the oil pan, and
then slide the special tool sideways.
note |
If any surrounding parts
interfere with the removal, there is no need to
use the special
tool.
|
3.Remove the oil pan.
|
|
1.Remove sealant from the
oil pan and cylinder block surfaces.
|
|
2.Install the oil pan gasket
so that its fluorine-coated surface faces the cylinder
block side.
|
|
4.Tighten the oil pan bolts
to the specified torque. Tightening torque: 9.0
± 3.0 N·m
|