| Item |
Standard value |
Limit |
|||
| Timing belt |
|||||
| Auto-tensioner rod extension length (with timing belt
installed) mm |
2.3 - 7.6 |
- |
|||
| Auto-tensioner rod extension length (when free) mm |
14.5 |
- |
|||
| Auto-tensioner rod retraction length (when pressed with force of 100 - 200 N·m) mm |
Less than 1 |
- |
|||
| Rocker arm and camshaft |
|||||
| Cam height mm |
Inlet |
Except high power engine |
35.47 |
34.97 |
|
| High power engine |
35.42 |
34.92 |
|||
| Exhaust |
35.41 |
34.91 |
|||
| Valve clearance (cold engine) mm |
Inlet |
0.09 |
- |
||
| Exhaust |
0.14 |
- |
|||
| Cylinder head and valves |
|||||
| Flatness of gasket surface mm *Grinding is not suitable for correction. |
0.03 |
*0.2 |
|||
| Cylinder head overall height mm |
129.9 - 130.1 |
- |
|||
| Valve thickness of valve head (margin)
mm |
Inlet |
1.3 |
0.8 |
||
| Exhaust |
1.5 |
1.0 |
|||
| Valve length mm |
Inlet |
107.58 |
107.08 |
||
| Exhaust |
107.98 |
107.48 |
|||
| Valve spring free height mm |
53.1 |
52.1 |
|||
| Valve spring cut-of-squareness |
2° or less |
Max. 4° |
|||
| Valve stem-to guide clearance mm |
Inlet |
0.020 - 0.047 |
0.10 |
||
| Exhaust |
0.035 - 0.062 |
0.15 |
|||
| Valve seat contact width mm |
1.1 - 1.5 |
- |
|||
| Valve guide protrusion |
18.3 - 18.9 |
- |
|||
| Oil pan and oil pump |
|||||
| Balancer shaft oil clearance mm |
Front |
Right |
0.02 - 0.05 |
- |
|
| Left |
0.02 - 0.06 |
- |
|||
| Rear |
0.06 - 0.10 |
- |
|||
| Oil pump tip clearance mm |
0.11 - 0.24 |
- |
|||
| Oil pump side clearance mm |
0.04 - 0.10 |
- |
|||
| Oil pump body clearance mm |
0.10 - 0.18 |
0.35 |
|||
| Piston and connecting rod |
|||||
| Connecting rod big end side clearance mm |
0.10 - 0.25 |
0.40 |
|||
| Piston ring-to-ring groove clearance
mm |
No. 1 ring |
0.07 - 0.10 |
0.15 |
||
| No. 2 ring |
0.05 - 0.06 |
0.15 |
|||
| Oil ring |
0.02 - 0.06 |
0.10 |
|||
| Piston ring end gap mm |
No. 1 ring |
0.20 - 0.30 |
0.8 |
||
| No. 2 ring |
0.20 - 0.35 |
0.8 |
|||
| Oil ring |
0.25 - 0.45 |
0.8 |
|||
| Oil clearance at crankshaft pins mm |
0.019 - 0.056 |
0.1 |
|||
| Crankshaft and cylinder block |
|||||
| Crankshaft axial play mm |
0.05 - 0.25 |
0.45 |
|||
| Oil clearance at crankshaft journal mm |
0.020 - 0.038 |
0.1 |
|||
| Cylinder block gasket surface warp mm |
0.05 |
0.1 |
|||
| Cylinder inner diameter mm |
91.10 - 91.13 |
- |
|||
| Cylindricity mm |
0.02 or less |
- |
|||