|
1.Start the engine and allow
it to warm up until the temperature of the engine coolant
reaches 80 °C to 90 °C.
|
|
2.Remove the engine oil
filler cap.
|
|
3.Remove the under skid
plate and engine room under cover front (Refer to GROUP 51
- Under Cover ).
|
|
4.
warning |
Use care as engine oil could
be hot.
|
Remove the engine oil pan drain plug to drain engine
oil.
|
![](../../../img/12/ACE01763AB00ENG.png)
|
5.Install a new engine oil
pan drain plug gasket, and then tighten the engine oil pan
drain plug to the specified torque. Tightening
torque: 39 ± 5 N·m 6.Install
the under skid plate and engine room under cover front
(Refer to GROUP 51 - Under Cover ).
|
![](../../../img/12/ACA00609AB00ENG.png)
|
7.Refill with specified
quantity of engine oil. Specified Engine
Oil
- ACEA classification:
"For service A1/B1, A3/B3, A3/B4 or A5/B5"
- ILSAC classification: ILSAC certificated
oil
- API classification:
"For service SG or higher"
Total quantity (Includes volume inside engine oil
filter): 4.3 L
note |
Select engine oil of the
proper SAE viscosity number according to the
atmospheric temperature. SAE 0W-30, 5W-30,
and 5W-40 engine oils can only be used if they
meet ACEA A3/B3, A3/B4 or A5/B5 and API SG (or
higher) specification.
|
8.Install the engine oil filler
cap. 9.Check engine oil level.
|
|
1.Start the engine and allow
it to warm up until the temperature of the coolant reaches
80 °C to 90 °C.
|
|
2.Remove the oil filler
cap.
|
|
3.Remove the under skid
plate and engine room under cover front (Refer to GROUP 51
- Under Cover ).
|
|
4.
warning |
Use care as oil could be
hot.
|
Remove the oil drain plug to drain oil.
|
![](../../../img/12/ACE01736AB00ENG.png)
|
5.Install a new oil drain
plug gasket, and then tighten the drain plug to the
specified torque. Tightening torque: 39 ±
5 N·m 6.Install the under skid plate
and engine room under cover front (Refer to GROUP 51 -
Under Cover ).
|
![](../../../img/12/AC903479AA00ENG.png)
|
7.Refill with specified
quantity of oil. Specified Engine
Oil
- ACEA classification:
"For service A1/B1, A3/B3, A3/B4 or A5/B5"
- API classification:
"For service CD or higher"
Total quantity (Includes volume inside oil filter
and oil cooler):
<2WD-Except
high rider> 7.4L <2WD-High rider,
4WD> 6.4L
note |
Select engine oil of the
proper SAE viscosity number according to the
atmospheric temperature.
|
8.Install the oil filler
cap. 9.Check oil level.
|
|
1.Start the engine and allow
it to warm up until the temperature of the coolant reaches
80 °C to 90 °C.
|
|
2.Remove the oil filler
cap.
|
|
3.Remove the under skid
plate and engine room under cover front (Refer to GROUP 51
- Under Cover ).
|
|
4.
warning |
Use care as oil could be
hot.
|
Remove the oil drain plug to drain oil.
|
![](../../../img/12/ACE01737AB00ENG.png)
|
5.Install a new oil drain
plug gasket, and then tighten the drain plug to the
specified torque. Tightening torque: 39 ±
5 N·m 6.Install the under skid plate
and engine room under cover front (Refer to GROUP 51 -
Under Cover ).
|
![](../../../img/12/AC903479AA00ENG.png)
|
7.Refill with specified
quantity of oil. Specified Engine
Oil
- ACEA classification:
"For service A1/B1, A3/B3, A3/B4 or A5/B5"
- API classification:
"For service CD or higher"
Total quantity (Includes volume inside oil filter
and oil cooler): 8.4L
note |
Select engine oil of the
proper SAE viscosity number according to the
atmospheric temperature.
|
8.Install the oil filler
cap. 9.Check oil level.
|
|
1.Start the engine and allow
it to warm up until the temperature of the coolant reaches
80 °C to 90 °C.
|
|
2.Remove the oil filler
cap.
|
|
3.Remove the under skid
plate and engine room under cover front (Refer to GROUP 51
- Under Cover ).
|
|
4.
warning |
Use care as oil could be
hot.
|
Remove the oil drain plug to drain oil.
|
![](../../../img/12/ACE01737AB00ENG.png)
|
5.Install a new oil drain
plug gasket, and then tighten the drain plug to the
specified torque. Tightening torque: 39 ±
5 N·m 6.Install the under skid plate
and engine room under cover front (Refer to GROUP 51 -
Under Cover ).
|
![](../../../img/12/ACE02877AA00ENG.png)
|
7.Refill with specified
quantity of oil. Specified Engine
Oil
- ACEA classification:
"For service C1, C2, C3 or C4"
- JASO classification: "For service DL-1"
Total quantity (Includes volume inside oil filter
and oil cooler): 8.4L
note |
Select engine oil of the
proper SAE viscosity number according to the
atmospheric temperature.
|
8.Install the oil filler
cap. 9.Check oil level.
|