REMOVAL AND INSTALLATION


<4D5>


Pre-removal Operation
  • Under Skid Plate and Engine Room Under Cover Front Removal (Refer to GROUP 51 - Under Cover ).
  • Engine Coolant Draining (Refer to GROUP 14 - On-vehicle Service, Engine Coolant Replacement ).
  • Engine Oil Draining (Refer to ).
  • Alternator Removal (Refer to GROUP 16 - Charging System, Alternator ).

 Post-installation Operation
  • Alternator Installation (Refer to GROUP 16 - Charging System, Alternator ).
  • Engine Coolant Refilling (Refer to GROUP 14 - On-vehicle Service, Engine Coolant Replacement ).
  • Engine Oil Refilling (Refer to ).
  • Under Skid Plate and Engine Room Under Cover Front Installation (Refer to GROUP 51 - Under Cover ).




Removal steps


1.
 Water hose connection


2.
 Water hose connection


3.
 O-ring

>>A<<
 4.
 Engine oil cooler


5.
 Gasket

<4N1>


Pre-removal Operation
  • Under Skid Plate and Engine Room Under Cover Front Removal (Refer to GROUP 51 - Under Cover ).
  • Engine Coolant Draining (Refer to GROUP 14 - On-vehicle Service, Engine Coolant Replacement ).
  • Engine Oil Draining (Refer to ).
  • Battery Tray Stay Removal (Refer to GROUP 54A - Battery ).
  • Oil Level Gauge Guide Removal (Refer to GROUP 15 - Inlet Manifold ).
  • EGR Valve and EGR Pipe Removal (Refer to GROUP 17 - Emission Control, EGR Valve and EGR Cooler ).

 Post-installation Operation
  • EGR Valve and EGR Pipe Removal (Refer to GROUP 17 - Emission Control, EGR Valve and EGR Cooler ).
  • Oil Level Gauge Guide Installation (Refer to GROUP 15 - Inlet Manifold ).
  • Battery Tray Stay Installation (Refer to GROUP 54A - Battery ).
  • Engine Coolant Refilling (Refer to GROUP 14 - On-vehicle Service, Engine Coolant Replacement ).
  • Engine Oil Refilling (Refer to ).
  • Under Skid Plate and Engine Room Under Cover Front Installation (Refer to GROUP 51 - Under Cover ).




Removal steps


1.
 Water hose H connection


2.
 Water hose I connection
<<A>>
3.
 Engine oil cooler


4.
 O-ring


·
 Oil pipe (Refer to GROUP 11E - Vacuum Pump ).


5.
 Oil cooler bracket


6.
 O-ring

REMOVAL SERVICE POINT

<<A>> ENGINE OIL COOLER REMOVAL
Remove the engine oil cooler from above the vehicle.

INSTALLATION SERVICE POINT

>>A<< ENGINE OIL COOLER INSTALLATION

Position the tab as shown in the illustration.