|
1.Remove the instrument
panel lower panel assembly <LHD> or glove
box <RHD> (Refer to GROUP 52A - Instrument
Panel ).
|
![](../../../img/13/ACE01770AB00ENG.png)
|
2.Remove the fuel pump relay
in the junction block. 3.Crank the engine for at
least two seconds. 4.If the engine is not started,
turn the ignition switch to the "LOCK" (OFF)
position. 5.If the engine is started, turn the
ignition switch to the "LOCK" (OFF) position after
the engine stopped. 6.Install the fuel pump
relay. 7.Install the instrument panel lower panel
assembly <LHD> or glove
box <RHD> (Refer to GROUP 52A - Instrument
Panel ). 8.Connect
the M.U.T.-III and read the diagnosis code. When the
diagnosis code is set,
delete the diagnosis code using the M.U.T.-III. (Refer to
GROUP 00 - How To Use Troubleshooting/Inspection
Service Points, Diagnosis Function ).
|