![](../../../img/13/AK501445AB00ENG.png)
![](../../../img/13/ACE02813AB00ENG.png)
|
1.Remove the engine coolant
temperature sensor using the special tool engine coolant
temperature sensor wrench (MB992042).
|
![](../../../img/13/AKX01622AA00ENG.png)
|
2.With temperature sensing
portion of engine coolant temperature sensor immersed in hot
water, check resistance. Standard
value:
14 - 17 kΩ (at
-20°C) [5.1 - 6.5
kΩ (at 0°C)] 2.1 - 2.7
kΩ (at 20°C) [0.9 - 1.3
kΩ (at 40°C)] [0.48
- 0.68 kΩ (at
60°C)] [0.26 - 0.36
kΩ (at
80°C)]
3.If the
resistance deviates from the standard value greatly, replace
the sensor.
|
![](../../../img/13/ACE02808AC00ENG.png)
|
4.Apply sealant to threaded
portion. Specified
sealant:
ThreeBond 1324N or
equivalent
5.Tighten the engine
coolant temperature sensor to the specified torque, using
engine coolant temperature sensor wrench, special tool
(MB992042). Tightening torque: 30 ± 9
N·m
|