|
Q.
Is any other diagnosis code than P0088 set?
|
|
Inspection chart for diagnosis codes (Refer to ).
|
|
|
|
- Suction control valve connector check.
- Check suction control valve itself (Refer to
).
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or replace the suction control valve.
|
|
|
|
- Check power supply line for open/short circuit and damage.
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or repair the damaged harness wire then replace the common rail assembly and fuel injection tubes.
|
|
|
|
- Check output line for open/short circuit and damage.
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or repair the damaged harness wire then replace the common rail assembly and fuel injection tubes.
|
|
|
|
- Use special tool test harness (MB991658) to connect connector, and measure at pick-up harness.
- Engine: Idling
- Connect the oscilloscope special patterns pickup to terminal engine-ECU SCV+ line and body earth.
|
|
OK: The waveform should show a pattern similar to the illustration of inspection procedure using an oscilloscope (Refer to ).
|
|
Q.
Is the check result normal?
|
|
Replace the suction control valve.
|
|
|
|
- After replacing the common rail assembly and fuel injection tubes, re-check the trouble symptoms
|
|
Q.
Does the trouble symptom persist?
|