|
- Using M.U.T.-III, perform CAN bus line diagnosis.
|
|
Q.
Is the check result normal?
|
|
Correct CAN bus line (Refer to GROUP 54C - Diagnosis - Can Bus Diagnostic Chart ), and then go to Step 4.
|
|
|
|
- Confirm whether the diagnosis codes are set in the ASTC-ECU.
|
|
Q.
Is the diagnosis code set?
|
|
YES : Perform the troubleshooting of anti-skid braking system (Refer to GROUP 35C - Troubleshooting - Diagnosis Code Chart ).
|
|
|
|
Check that the other ECU performing CAN communication with ASTC-ECU sets diagnosis code No. U1102 (Refer to GROUP 54C - CAN communication-related Diagnosis Code Table ).
|
|
Q.
Is the diagnosis code set?
|
|
- Reconfirm whether the diagnosis codes are set in the engine-ECU.
- Erase the diagnosis codes being set.
- Ignition switch: "LOCK" (OFF) to ON
- Confirm whether the diagnosis codes are set.
|
|
Q.
Is the diagnosis code set?
|
|
Intermittent malfunction in CAN bus line between engine-ECU and ASTC-ECU (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunction ).
|
|
|
|
- After replacing the ASTC-ECU, re-check whether the diagnosis code is set.
|
|
Q.
Is the diagnosis code set?
|