|
- Disconnect connector, and measure at control valve side.
- Resistance between terminal.
|
|
OK: 6.9 - 7.9 Ω (at 20°C)
|
|
Q.
Is the check result normal?
|
|
Replace the oil feeder control valve.
|
|
|
|
- Disconnect connector, and measure at harness side.
- Ignition switch: ON
- Voltage between terminal power supply line and body earth.
|
|
Q.
Is the check result normal?
|
|
![](../../../buttons/03btn002.png)
Repair or replace the connector, or check
and repair harness between oil feeder control valve connector terminal and engine control relay connector
terminal.
- Check power supply line open/short circuit
|
|
|
|
- Disconnect connector, and measure at harness side.
- Ignition switch: ON
- Voltage between terminal OCV and body earth.
|
|
Q.
Is the check result normal?
|
|
![](../../../buttons/03btn002.png)
Repair or replace the connector, or check
and repair harness between oil feeder control valve connector terminal and engine-ECU connector terminal
OCV.
- Check output line for open/short circuit.
|
|
|
|
- Check output line for damage.
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or repair the damaged harness wire.
|
|
|
|
- Check power supply line for damage.
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or repair the damaged harness wire.
|
|
|
|
- Reconfirmation of diagnosis code.
|
|
Q.
Is the diagnosis code set?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection
Service Points - How to Cope with Intermittent Malfunctions ).
|
|
|