|
- Item 8: Intake air temperature sensor No. 2
|
|
OK: At ambient temperature (atmospheric temperature) or equivalent.
|
|
Q.
Is the check result normal?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunctions ).
|
|
|
|
- Check intake air temperature sensor No. 2 itself (Refer to
).
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or replace No. 2 intake air temperature sensor No. 2.
|
|
|
|
- Disconnect connector, and measure at harness side.
- Ignition switch: ON
- Voltage between terminal engine-ECU ATS2 line and body earth.
|
|
Q.
Is the check result normal?
|
|
- Check output line for open circuit.
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or repair the damaged harness wire.
|
|
|
|
- Item 8: Intake air temperature sensor No. 2
|
|
OK: At ambient temperature (atmospheric temperature) or equivalent.
|
|
Q.
Is the check result normal?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunctions ).
|
|
|
|
- Disconnect connector, and measure at harness side.
- Resistance between terminal engine-ECU AT2E line and body earth.
|
|
OK: Continuity (2 Ω or less)
|
|
Q.
Is the check result normal?
|
|
- Check earthing line for open circuit.
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or repair the damaged harness wire.
|
|
|
|
- Check output line for damage.
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or repair the damaged harness wire.
|
|
|