|
- Item 174: Fin Thermo sensor
|
|
OK:
Evaporator surface temperature is the same as M.U.T.-III displayed temperature.
|
|
Q.
Is the check result normal?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection
Service Points - How to Cope with Intermittent Malfunctions ).
|
|
|
|
- Fin thermo sensor check (Refer to GROUP 55A - Heater Unit
and Cooling Unit - Inspection - Fin Thermo Sensor
).
|
|
Q.
Is the check result normal?
|
|
Replace the fin thermo sensor.
|
|
|
|
- Disconnect connector, and measure at harness side.
- Resistance between terminal ACTE line and earth.
|
|
OK: Continuity (2 Ω or less)
|
|
Q.
Is the check result normal?
|
|
Q.
Is the check result normal?
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
- Item 174: Fin Thermo sensor
|
|
OK:
Evaporator surface temperature is the same as M.U.T.-III displayed temperature.
|
|
Q.
Is the check result normal?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection
Service Points - How to Cope with Intermittent Malfunctions ).
|
|
|
|
- Disconnect connector, and measure at harness side.
- Ignition switch: ON
- Voltage between terminal AC/T line and earth.
|
|
Q.
Is the check result normal?
|
|
Q.
Is the check result normal?
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
Q.
Is the check result normal?
|
|
Repair the connector(s) or wiring harness.
|
|
|