![](../../../img/13/AC600149AC00ENG.png)
|
1.
caution |
Always check the fuel leak of
fuel tank with the vehicle loaded.
If it is checked with the fuel tank removed, the
fuel tank may be damaged.
|
Remove the fuel tank cap, install special tool fuel
leak check cap (MB992145).
|
![](../../../img/13/AC600150AB01ENG.png)
|
2.Install the hose and
pressure gauge to the special tool as shown.
|
![](../../../img/13/AC605625AF01ENG.png)
|
3.Block the canister vapour
hose (fuel tank side) to avoid damage
<4G6>.
|
![](../../../img/13/AC711418AB01ENG.png)
|
4.Remove the rear wheelhouse
splash shield (LH) (Refer to GROUP 42A - Splash Shield
),
and block the fuel tank vapour hose to avoid damage
<4D5, 4N1>. 5.
caution |
- Do not pressurise suddenly.
- Do not pressurise 11.76 kPa or more to
prevent the damage of
components.
|
Pressurise while checking the pressure gauge and
hold if it reaches from 9.80 to 11.76
kPa. 6.Leave it for approximately 3 minutes and
check that the pressure is not weakened. 7.If the
pressure is weakened, apply soapy water to each part with
pressurised state
and check the leak while confirming if air bubbles are
seen.
|