![](../../../img/15/AK403495AA00ENG.png)
|
1.Connect a manual pump
(pressure-application type) to nipple.
caution |
In order to avoid damage to
the diaphragm, do not apply a pressure
of 159 kPa or higher.
|
2.While gradually applying pressure, check
the pressure that begins to activate (approximately
1 mm stroke) the waste gate actuator
rod. Standard value: 127.1 - 139.7
kPa 3.If there is a significant deviation
from the standard value, check the actuator or
the waste gate valve: replace actuator or turbocharger
assembly if necessary.
|