REMOVAL AND INSTALLATION <4N1>


Pre-removal Operation
  • Water Pipe D, Air Inlet Fitting and Turbocharger Assembly Removal (Refer to ).

 Post-installation Operation
  • Water Pipe D, Air Inlet Fitting and Turbocharger Installation (Refer to ).




Removal steps


1.
 Exhaust manifold cover

>>B<<
 2.
 Exhaust manifold cover bracket

>>A<<
 3.
 Nut and washer


4.
 Exhaust manifold


5.
 Exhaust manifold gasket

INSTALLATION SERVICE POINTS

>>A<< NUT AND WASHER INSTALLATION

Tighten exhaust manifold mounting nuts to the specified torque in the order of number shown in the illustration.
Tightening torque: 62 ± 5 N·m

>>B<< EXHAUST MANIFOLD COVER BRACKET INSTALLATION

1.Install the exhaust manifold cover bracket temporarily tighten the mounting bolts in the order of number shown in the illustration.
2.Tighten mounting bolts to the specified torque in the order of number shown in the illustration.
Tightening torque: 26 ± 3 N·m