|
1.Turn the ignition switch
to the "ON" position.
|
![](../../../img/17/ACC00847AB00ENG.png)
![](../../../img/17/ACE01447AB00ENG.png)
|
2.Push the cruise control
ON/OFF switch of the cruise control switches, and
check
that the cruise control indicator lamp within the
combination meter illuminates. 3.Push the cruise
control ON/OFF switch again, and check that the cruise
control
indicator lamp within the combination meter goes
out.
|
|
1.Turn the ignition switch
to the "ON" position.
|
![](../../../img/17/ACC00847AF00ENG.png)
![](../../../img/17/ACE01448AB00ENG.png)
|
2.Push the speed limiter
ON/OFF switch of the cruise control switches, and
check
that the speed limiter display screen is displayed on the
multi information display in the combination
meter. 3.Push the speed limiter ON/OFF
switch again, and check that the speed limiter
display screen goes out.
|
|
1.Turn the ignition switch
to the "ON" position.
|
|
2.Push the cruise control
ON/OFF switch (cruise control system: ON, cruise
control indicator lamp: illuminated). Or Push the speed
limiter ON/OFF switch (cruise
control system: ON, speed limiter display screen:
display).
|
|
3.Drive at the desired speed
within the range of approximately 40 km/h or
more.
|
![](../../../img/17/ACC00847AC00ENG.png)
|
4.Push the SET -
switch. 5.Check to be sure that when the SET
- switch is released the speed is the
desired constant speed. The speed limiter will store a set
vehicle speed, and then regulate
the vehicle speed within that stored speed.
note |
If the vehicle speed decreases
to approximately 15 km/h below the set
speed because
of climbing a hill for example, it is normal for
the cruise control to be cancelled. When the
vehicle speed is decelerated to the low speed
limit (approximately 40 km/h) or less,
the constant speed driving will be cancelled
even if the vehicle speed is not decelerated 15
km/h or more from the set speed.
|
|
|
1.Turn the ignition switch
to the "ON" position.
|
|
2.Push the cruise control
ON/OFF switch (cruise control system: ON, cruise
control indicator lamp: illuminated). Or Push the speed
limiter ON/OFF switch (cruise
control system: ON, speed limiter display screen:
display).
|
|
3.Set to the desired speed
within the range of approximately 40 km/h or
more.
|
![](../../../img/17/ACC00847AD00ENG.png)
|
4.Push the RES +
switch. 5.Check to be sure that acceleration
continues while the RES + switch is pushed,
and that the speed at the time it was released becomes the
constant driving speed. Every time the
RES + switch is pressed briefly, the speed limiter
will store a vehicle speed. The
speed limiter will regulate the vehicle speed within that
last stored speed.
note |
Acceleration can be continued
even if the vehicle speed has passed the high
speed limit.
But the constant driving speed when the RES
+ switch is released will be recorded as
the high speed limit.
|
|
|
1.Turn the ignition switch
to the "ON" position.
|
|
2.Push the cruise control
ON/OFF switch (cruise control system: ON, cruise
control indicator lamp: illuminated). Or Push the speed
limiter ON/OFF switch (cruise
control system: ON, speed limiter display screen:
display).
|
|
3.Set to the desired speed
within the range of approximately 40 km/h or
more.
|
|
5.Check to be sure that
deceleration continues while the SET - switch is
pushed,
and that the speed at the time it was released becomes the
constant driving speed. Every time the
SET - switch is pressed briefly, the speed limiter
will store a vehicle speed. The
speed limiter will regulate the vehicle speed within that
last stored speed.
|
|
1.Turn the ignition switch
to the "ON" position.
|
|
2.Push the cruise control
ON/OFF switch (cruise control system: ON, cruise
control indicator lamp: illuminated). Or Push the speed
limiter ON/OFF switch (cruise
control system: ON, speed limiter display screen:
display).
|
|
3.Set to the desired speed
within the range of approximately 40 km/h or
more.
|
![](../../../img/17/ACC00847AE00ENG.png)
|
4.When any of the following
operations are performed while at constant speed during
cruise control, check if normal driving is resumed and
deceleration occurs. Check that the speed limiter
is deactivated by pressing the CANCEL switch.
note |
The accelerator pedal must NOT
be depressed.
|
(1)
The CANCEL switch is pushed. (2)
The brake pedal is depressed. 5.At a vehicle speed
of the low speed limit (approximately 40 km/h) or
higher,
check if when the RES + switch is pushed, the vehicle
speed returns to the speed before
cruise control driving was cancelled, and constant speed
driving occurs. 6.When the cruise control
ON/OFF switch is pushed again (cruise control system:
OFF) while driving at constant speed, check if normal
driving is resumed and deceleration occurs.
note |
The accelerator pedal must NOT
be depressed.
|
|