|
Using M.U.T.-III, perform CAN bus diagnosis (Refer to GROUP 54C - Explanation
About The M.U.T.-III Can Bus Diagnostics).
|
|
Q.
Is the check result satisfactory?
|
|
Repair the CAN bus lines (Refer to GROUP 54C - Troubleshooting, Can Bus
Diagnostic Table). Then go to Step 5.
|
|
|
|
Using M.U.T.-III, perform MPI system diagnosis code (Refer to GROUP 13A - Troubleshooting,
Diagnosis Function).
|
|
Q.
Is diagnosis code No.U0155 set?
|
|
Repair the MPI system (Refer to GROUP 13A - Troubleshooting, Diagnosis
Code Procedures, Code No.U0155: combination meter Time-out). Then go to Step 5.
|
|
|
|
Using M.U.T.-III, check the combination meter system actuator test (Refer to GROUP 54A - Combination
Meter, Troubleshooting, Actuator Test Table).
|
|
Q.
Is the check result normal?
|
|
Repair the combination meter system (Refer to GROUP 54A - Combination
Meter, Trouble Symptom Chart ). Then go to Step 5.
|
|
|
|
Q.
When the cruise control ON/OFF switch is turned ON, is the cruise control
indicator lamp illuminated?
|
|
It can be assumed that this malfunction is intermittent (Refer to GROUP 00 - How
to Use Troubleshooting/Inspection Service Points, How to Cope with Intermittent Malfunction).
|
|
|
|
Replace the engine-ECU (Refer to GROUP 13A - Engine-ECU). Then go to
Step 5.
|
|
|
|
Q.
When the cruise control ON/OFF switch is turned ON, is the cruise control
indicator lamp illuminated?
|
|
The procedure is complete.
|
|
|