|
Using M.U.T.-III, check the data list (Refer to data list reference table ).
|
|
Q.
Is the check result normal?
|
|
- Check connector or harness wire for open/short circuit and damage.
|
|
Q.
Is the check result normal?
|
|
Repair connector or damaged harness wire. Then go to Step 6.
|
|
|
|
Refer to GROUP 21A - On-vehicle Service, Clutch Switch Check.
|
|
Q.
Is the check result normal?
|
|
Replace the clutch switch (Refer to GROUP 21A - Clutch Pedal). Then go
to Step 6.
|
|
|
|
Using M.U.T.-III, check the data list (Refer to data list reference table ).
|
|
Q.
Is the check result normal?
|
|
Replace the engine-ECU (Refer to GROUP 13A - Engine-ECU). Then go to
Step 6.
|
|
|
|
Q.
When the clutch pedal is depressed, is the cruise control cancelled?
|
|
It can be assumed that this malfunction is intermittent (Refer to GROUP 00 - How
to Use Troubleshooting/Inspection Service Points, How to Cope with Intermittent Malfunction).
|
|
|
|
Replace the engine-ECU (Refer to GROUP 13A - Engine-ECU). Then go to
Step 6.
|
|
|
|
Q.
When the clutch pedal is depressed, is the cruise control cancelled?
|
|
The procedure is complete.
|
|
|