|
Using M.U.T.-III, perform CAN bus diagnosis (Refer to GROUP 54C - Explanation
About The M.U.T.-III Can Bus Diagnostics ).
|
|
Q.
Is the check result satisfactory?
|
|
Repair the CAN bus lines (Refer to GROUP 54C - Troubleshooting, Can Bus
Diagnostic Table ). Then go to Step 5.
|
|
|
|
Using M.U.T.-III, perform diesel fuel system diagnosis code (Refer to GROUP 13C <4N1> - Troubleshooting,
Diagnosis Function ).
|
|
Q.
Is diagnosis code No.U01108 set?
|
|
Repair the diesel fuel system (Refer to GROUP 13C - Troubleshooting,
Diagnosis Code Procedures, Code No.U1108: combination meter Time-out ). Then
go to Step 5.
|
|
|
|
Using M.U.T.-III, check the combination meter system special function (Refer to GROUP
54A - Combination Meter, Troubleshooting, Special Function Table ).
|
|
Q.
Is the check result normal?
|
|
Repair the combination meter system (Refer to GROUP 54A - Combination
Meter, Trouble Symptom Chart ). Then go to Step 5.
|
|
|
|
Q.
When the speed limiter ON/OFF switch is turned ON, is the speed limiter display
screen displayed?
|
|
It can be assumed that this malfunction is intermittent (Refer to GROUP 00 - How
to Use Troubleshooting/Inspection Service Points, How to Cope with Intermittent Malfunction ).
|
|
|
|
Replace the engine-ECU (Refer to GROUP 13C <4N1> - Engine-ECU ).
Then go to Step 5.
|
|
|
|
Q.
When the speed limiter ON/OFF switch is turned ON, is the speed limiter display
screen displayed?
|
|
The procedure is complete.
|
|
|