DISASSEMBLY AND REASSEMBLY

			Disassembly steps
		1.	Push rod
		2	Boot
<<A>>	>>A<<	3.	Piston
<<A>>	>>A<<	4.	Piston cup B
<<A>>	>>A<<	5.	Piston cup A
		6.	Conical spring
		7.	Cap
		8	Bleeder plug
	>>A<<	9.	Release cylinder

DISASSEMBLY SERVICE POINT

<<A>> PISTON CUP A/ PISTON CUP B/PISTON REMOVAL

warning

Cover with a shop towel to prevent the piston from popping out.
Apply compressed air slowly to prevent brake fluid from splashing.

Remove the piston and piston cup from the release cylinder using compressed air.

REASSEMBLY SERVICE POINT

>>A<< RELEASE CYLINDER/PISTON CUP A/PISTON CUP B/PISTON INSTALLATION

Apply brake fluid to the outer surfaces of the piston and piston cups and inner surface of the release cylinder, and then insert into the release cylinder.
Specified Brake Fluid:
Brake fluid DOT 3 or DOT 4