|
Remove the starter with its
connector connected. Keep the starter fixed to the engine
side (Refer to GROUP 16 - Starter Motor Assembly ).
|
![](../../../img/22/ACE02109AC00ENG.png)
|
caution |
Support the engine assembly by
inserting a wooden piece between the front
suspension front crossmember assembly and the
engine oil pan to prevent the engine assembly
from being tilted significantly when the
transmission assembly is separated from the
engine assembly.
|
|
![](../../../img/22/ACE02126AC00ENG.png)
|
1.Place a wooden piece (45
mm wide, 200 mm long and 45 mm thick) on the transmission
jack.
note |
Screw in bolts and nuts into
the transmission jack as stoppers to prevent the
wooden piece from sliding off.
|
2.Place the transmission assembly on the
transmission jack, being careful that the assembly does not
touch the cooling fan. 3.
caution |
Remove the transmission, being
careful that the adapter does not touch the
vehicle body.
|
Remove the transmission assembly.
|