|
Using M.U.T.-III, perform CAN bus line diagnosis.
|
|
Q.
Is the check result normal?
|
|
Repair the CAN bus line (Refer to GROUP 54C - Troubleshooting ). and then go to Step 4.
|
|
|
|
Check whether the ABS-ECU or ASTC-ECU diagnosis codes are set or not.
|
|
Q.
Is the diagnosis code set?
|
|
YES : Diagnose the ABS-ECU (Refer to GROUP 35B - Troubleshooting ) or ASTC-ECU (Refer to GROUP 35C - Troubleshooting ).
|
|
|
|
Reconfirm whether the diagnosis codes are set in the transfer-ECU.
|
|
(1)Erase the diagnosis code.
|
|
(2)Check if the diagnosis code is set.
|
|
Q.
Is the diagnosis code set?
|
|
Intermittent malfunction in CAN bus line between ABS-ECU or ASTC-ECU and transfer-ECU (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunction ).
|
|
|
|
After replacing the ABS-ECU (Refer to GROUP 35B - Hydraulic unit ) or ASTC-ECU (Refer to GROUP 35C - Hydraulic unit ), re-check the transfer-ECU diagnosis code output.
|
|
Q.
Is the diagnosis code set?
|
|
Replace the transfer-ECU (Refer to ).
|
|
|