|
1.Use special tool remover
(MD998801) to support the 3RD gear sleeve.
|
|
2.Press the input shaft with
a press and remove the 3RD gear sleeve.
|
|
1.Use special tool remover
(MD998801) to support the bearing.
|
|
2.Press the input shaft with
a press and remove the bearing.
|
|
1.Use special tool remover
(MD998801) to support the 5TH speed gear and 5TH gear
sleeve.
|
|
2.Press the input shaft with
a press and remove the 5TH speed gear and 5TH gear
sleeve.
|
|
1.Use special tool remover
(MD998801) to support the 5TH and 6TH synchronizer hub and
6TH speed gear.
|
|
2.Press the input shaft with
a press and remove the 5TH and 6TH synchronizer hub and
6TH speed gear.
|
|
1.Use special tool remover
(MD998801) to support the bearing.
|
|
2.Press the input shaft with
a press and remove the bearing.
|
|
1.Use special tools to
install the bearing.
- Installer cap (MD998812)
- Installer-200 (MD998814)
- Installer adapter (42) (MD998820)
|
|
2.Press the input shaft with
a press and install the bearing.
|
|
1.Install the thickest snap
ring that can be fitted in the snap ring groove of the input
shaft.
|
|
2.Make sure that the bearing
end play meets the standard value. Standard
value: - 0.01 - 0.09 mm
|
|
1.The identification mark (2
mm-dia. circle) is stamped on the side of the 5th and 6th
synchronizer hubs. These identification marks should face
rearwards when these hubs are inserted
into the input shaft.
|
|
2.Use special tools to
install the 5TH and 6TH synchronizer hub.
- Installer cap (MD998812)
- Installer-200 (MD998814)
- Installer adapter (50) (MD998824)
|
|
3.Press the input shaft with
a press and install the 5TH and 6TH synchronizer
hub.
|
![](../../../img/22/ACE03847AB00ENG.png)
|
The identification groove on the
5th and 6th synchronizer sleeves should face towards
the clutch housing when the sleeves are inserted into the
input shaft.
|
|
1.Use special tools to
install the 5TH gear sleeve.
- Installer cap (MD998812)
- Installer-200 (MD998814)
- Installer adapter (40) (MD998819)
|
|
2.Press the input shaft with
a press and install the 5TH gear sleeve.
|
|
1.Use special tools to
install the bearing.
- Installer cap (MD998812)
- Installer-200 (MD998814)
- Installer adapter (42) (MD998820)
|
|
2.Press the input shaft with
a press and install the bearing.
|
|
1.Use special tools to
install the 3RD gear sleeve.
- Installer cap (MD998812)
- Installer-200 (MD998814)
- Installer adapter (40) (MD998819)
|
|
2.Press the input shaft with
a press and install the 3RD gear sleeve.
|