DISASSEMBLY AND REASSEMBLY


Disassembly steps

>>C<<
 1.
 Seal bolt


2.
 Bearing retainer


3.
 Transfer input gear

>>B<<
 4.
 Oil seal


5.
 Baffle plate

>>A<<
 6.
 Oil seal


7.
 Transfer case plate

REASSEMBLY SERVICE POINTS

>>A<< OIL SEAL INSTALLATION

1.Apply specified grease to the lip of the oil seal.
Specified lubricant:
MITSUBISHI MOTORS GENUINE Part No. 0101011 or equivalent
2.Use socket wrench to install the oil seal.

>>B<< OIL SEAL INSTALLATION

1.Apply specified grease to the lip of the oil seal.
Specified lubricant:
MITSUBISHI MOTORS GENUINE Part No. 0101011 or equivalent
2.Use special tools to install the oil seal.

  • Installer bar (MB990938)
  • Installer adapter (MB990933)

>>C<< SEAL BOLT INSTALLATION

1.Apply the specified sealant to the threads.
Specified sealant:
3M STUD Locking No. 4170 or equivalent
note The new bolt does not require sealant application as it is precoated with sealant.