|
Use special tool front hub &
flange yoke holder (MB990767) to hold the companion
flange, and then remove the companion flange self-locking
nut.
|
|
Use special tools to remove the
companion flange.
|
|
- Side brg puller cup (MB990811)
- Axle shaft puller (MB990926)
|
|
Use special tools to install the
bushing.
|
|
- Installer adaptor (MB990926)
- Installer bar (MB990938)
|
![](../../../img/22/ACE03828AB00ENG.png)
|
1.Completely degrease the
FIPG-applied surface so that water and oil including the old
sealant
cannot adhere to the surface coated with the
sealant. Never touch the degreased surface by hand.
2.
caution |
Squeeze the sealant out evenly
to apply it in an unbroken, non-excessive
quantity.
|
Apply the sealant to the M/T case
rear. Specified sealant: THREEBOND 1216 or
equivalent
|
|
1.Apply the specified
lubricant to the oil seal lip. Specified
lubricant: MITSUBISHI MOTORS GENUINE part No. 0101011 or
equivalent
|
|
2.Use special tool install
the oil seal.
- Installer adaptor (MB990933)
- Installer bar (MB990938)
|
![](../../../img/22/ACE03829AB00ENG.png)
|
1.Completely degrease the
FIPG-applied surface so that water and oil including the old
sealant
cannot adhere to the surface coated with the
sealant. Never touch the degreased surface by hand.
2.
caution |
Squeeze the sealant out evenly
to apply it in an unbroken, non-excessive
quantity.
|
Apply the sealant to the extension
housing. Specified sealant: THREEBOND 1216 or
equivalent
|
![](../../../img/22/ACE03853AB00ENG.png)
|
1.Completely degrease the
FIPG-applied surface so that water and oil including the old
sealant
cannot adhere to the surface coated with the
sealant. Never touch the degreased surface by hand.
2.
caution |
Squeeze the sealant out evenly
to apply it in an unbroken, non-excessive
quantity.
|
Apply the sealant to the companion
flange. Specified sealant: THREEBOND 1216 or
equivalent
|
|
1.
caution |
- Do not damage other parts.
- Do not apply the excessive load to
shaft.
|
Caulk into the overall output shaft groove.
|
|
2.Make sure of firmly
caulking self-locking nut on the groove, after
caulking.
|