![](../../../img/23/ACE02064AB00ENG.png)
|
1.Apply the parking brake,
and check that the selector lever moves smoothly and
accurately to each position. 2.Check that the
engine starts when the selector lever is in the N or P
position, and that it does not start when the selector lever
is in any other position. 3.Start the engine,
release the parking brake, and check that the vehicle moves
forward when the selector lever is moved from N position to
the D position, and that the vehicle reverses when the
selector lever is moved to the R position. 4.Stop
the engine. 5.Turn the ignition switch to ON
position. Check that the backup lamp illuminates when the
selector lever is moved from P position to R
position.
note |
The shift lock mechanisms
prevent movement of the selector lever from the
P position if the ignition switch is in a
position other than LOCK (OFF) and the brake
pedal is not depressed.
|
|