|
Item 1: Shift solenoid No.1
|
|
OK: Operating sound can be heard.
|
|
Q.
Is the check result normal?
|
|
Repair the shift solenoid No.1 system.
|
|
|
|
Item 4: Input shaft speed sensor (Refer to data list reference table ).
|
|
Q.
Is the check result normal?
|
|
Repair the input shaft speed sensor system.
|
|
|
|
Item 6: A/T fluid temperature sensor 1 (Refer to data list reference table ).
|
|
Q.
Is the check result normal?
|
|
Repair the A/T fluid temperature sensor 1 system.
|
|
|
|
Check the engine mounting and transmission mounting insulator for damage and any faults.
|
|
Q.
Is the check result normal?
|
|
Repair or replace the engine mounting and transmission mounting insulator.
|
|
|
|
The stop lamps should illuminate when the brake pedal is depressed, and extinguish when released.
|
|
Q.
Is the check result normal?
|
|
Refer to stop lamp switch system (Refer to GROUP 54A - ETACS - Troubleshooting, Input Signal Procedures ).
|
|
|
|
Replace the A/T fluid. Then, check the trouble symptom again.
|
|
Q.
Is the trouble symptom reproduced?
|
|
This diagnosis is complete.
|
|
|
|
Replace the valve body. Then, check the trouble symptom again.
|
|
Q.
Is the trouble symptom reproduced?
|
|
This diagnosis is complete.
|
|
|
|
Replace the A/T-ECU. Then, check the trouble symptom again.
|
|
Q.
Is the trouble symptom reproduced?
|
|
Check the clutches and brakes for damage, and replace if necessary. (It is highly possible that the clutch C1 and one-way clutch F3 that engage in 1st gear are damaged.)
|
|
|
|
This diagnosis is complete.
|
|
|