Mounting surfaces of T/M case and adaptor <4WD>
| Symptom |
Inspection procedure number |
Reference page |
|
| Engine does not start |
1 |
|
|
| Driveaway fault |
Does not move forward |
2 |
|
| Does not move backward |
3 |
|
|
| Slip |
Slip at forward driving |
4 |
|
| Slip at backward driving |
5 |
|
|
| Time lag |
N → D time lag |
6 |
|
| N → R time lag |
7 |
|
|
| Engine stall |
Engine stall at shifting (N → D, N → R) |
8 |
|
| Engine stall at deceleration |
9 |
|
|
| Poor acceleration |
10 |
|
|
| Shifting fault |
Gear shift does not occur with 1st <=> 2nd |
11 |
|
| Gear shift does not occur with 2nd <=> 3rd |
12 |
|
|
| Gear shift does not occur with 3rd <=> 4th |
13 |
|
|
| Gear shift does not occur with 4th <=> 5th |
14 |
|
|
| Lock-up does not turn ON or OFF |
15 |
|
|
| Kick-down is not performed |
16 |
|
|
| Shift point fault |
17 |
|
|
| Selector lever detent feel is strong/weak |
18 |
|
|
| Shock is significant |
Shock is significant at shifting from N to D |
19 |
|
| Shock is significant at shifting from N to R |
20 |
|
|
| Shock is significant at upshift |
21 |
|
|
| Shock is significant when driving with accelerator fully closed |
22 |
|
|
| Shock is significant at kick-down |
23 |
|
|
| Shock is significant at accelerator ON/OFF (when no shift
change is performed) |
24 |
|
|
| Vibration |
At driveaway |
25 |
|
| Running |
26 |
|
|
| Oil leak |
Breather section |
27 |
|
| Mounting surfaces of engine and T/M housing |
28 |
|
|
| Mounting surfaces of T/M case and extension housing <2WD>, Mounting surfaces of T/M case and adaptor <4WD> |
29 |
|
|
| Manual shaft oil seal |
30 |
|
|
| Oil cooler pipe |
31 |
|
|
| O-ring [solenoid valve harness, union] |
32 |
|
|
| Extension housing <2WD>, Adaptor <4WD> |
33 |
|
|
| T/M case and oil pan |
34 |
|
|
| Noise |
Idling |
35 |
|
| At shifting while vehicle is parked |
36 |
|
|
| During driving |
37 |
|
|
| At shift change |
38 |
|
|
| At accelerator ON/OFF |
39 |
|
|
| Oil temperature warning lamp flashes or does not go
out |
40 |
|
|