KNUCKLE DISASSEMBLY AND REASSEMBLY <VEHICLES FOR MINING USE>

		Disassembly steps
	1.	Knuckle
>>A<<	2.	Dust seal

REASSEMBLY SERVICE POINT

>>A<< DUST SEAL INSTALLATION

1.Press-fit the new dust seal into the knuckle by using special tool mount bushing remover and installer base (MB991033).

2.Apply the multi-purpose grease around the inside and lip of the dust seal.
Specified grease: Multipurpose grease SAE J310, NLGI No.2 or equivalent
Amount to use: Inside of dust seal: Approx. 0.7 g, Lip: Approx. 0.5g