![](../../../img/26/ACX01079AB00ENG.png)
|
1.Remove insulator with
special tool transmission rear oil seal installer
(MD999547).
|
![](../../../img/26/AC500727AB00ENG.png)
|
2.Using the following
special tools with a hydraulic press, press fit each
insulator to adjust until the hollow part faces as shown and
the difference between A and B is 0.7 mm.
- Lower Arm Bushing Arbour (MB990947)
- Rear Suspension Bushing Remover and Installer Base
(MB990847)
- Mount Bushing Remover and Installer
(MB990981)
3.Install the differential mount bracket (rear)
as shown, so that the marking is located forward.
|