2.Remove the drain plug and gasket, to drain the oil.
3.Install the drain plug and new gasket, and tighten to the specified torque.
Tightening torque: 65 ± 5 N·m
|
1.Remove the under cover,
filler plug and gasket. 2.Remove the drain plug and gasket, to drain the oil. 3.Install the drain plug and new gasket, and tighten to the specified torque. Tightening torque: 65 ± 5 N·m |
 |
4.Add the oil until the
level comes to the lower portion of the filler plug
hole. Specified gear oil:
Amount to use: 1.2 L Tightening torque: 50 ± 10 N·m 6.Install the under cover. |