REAR DIFFERENTIAL LOCK DETECTION SWITCH CHECK <AIR PUMP TYPE>


1.Jack up the vehicle.
2.Remove the air pipe and air hose connection.

3.Connect a pressure gauge and air regulator to the air pipe.
4.
caution Do not apply a higher pressure so as not to damage the air regulator.
Adjust the outside air pressure with the air regulator until the pressure gauge shows approx. 24.5 kPa.
5.Lock the wheel on one side of the vehicle, and slowly turn the wheel on the other side.
6.Check for continuity in the rear differential lock detection switch.
Measurement conditions
 Specified condition
When air is applied
 Continuity (less than 2 Ω)
When air is released
 Open circuit