![](../../../img/31/ACC02921AB00ENG.png)
|
1.Fix the tyre on a tyre
changing machine. Then apply a bead breaking shoe to the
shown
range to disengage the tyre bead from the wheel
rim.
note |
For the opposite side, repeat
the same procedure.
|
|
![](../../../img/31/ACF07532AB00ENG.png)
|
2.Fix the tyre on a tyre
changing machine so that the TPMS transmitter is positioned
as
shown.
|
![](../../../img/31/ACC02923AC00ENG.png)
|
3.
caution |
Do not allow any impact or
shock to the TPMS transmitter with
a tyre lever or tyre bead.
|
Use a tyre lever to disengage the upper
bead. 4.Rotate the tyre in the direction of arrow
to disengage the tyre bead from the wheel.
|
![](../../../img/31/ACF07533AB00ENG.png)
|
5.Fix the tyre on a tyre
changing machine so that the TPMS transmitter is positioned
as
shown.
|
![](../../../img/31/ACC02924AC00ENG.png)
|
6.
caution |
Do not allow any impact or
shock to the TPMS transmitter with
a tyre lever or tyre bead.
|
Use a tyre lever to disengage the lower
bead.
|
![](../../../img/31/ACC03185AB00ENG.png)
|
7.Rotate the tyre in the
direction of arrow to disengage the tyre bead from the
wheel.
|
![](../../../img/31/ACC02930AB00ENG.png)
|
8.
caution |
Do not attempt to remove the
TPMS transmitter without depressing
the portion indicated by the arrow.
|
Remove the TPMS transmitter from the valve while
depressing the portion indicated by the
arrow.
|
![](../../../img/31/ACC03172AC00ENG.png)
|
9.Cut down the entire groove
shown by the arrow to remove the valve.
|
![](../../../img/31/ACC03172AD00ENG.png)
|
The projection shown by the arrow
should face towards the outside of the wheel.
|
![](../../../img/31/ACC02930AB00ENG.png)
|
1.
caution |
Do not attempt to install the
TPMS transmitter without depressing
the portion indicated by the arrow.
|
Install the TPMS transmitter into the valve while
depressing the portion indicated by
the arrow. 2.
caution |
Make sure that the TPMS
transmitter and the valve are installed
securely.
|
Pull the TPMS transmitter from the valve by hand to
make sure it is secure.
note |
If the TPMS transmitter is
disconnected from the valve, the tab securing
the TPMS transmitter
to the valve may be broken.
|
|
![](../../../img/31/AC609532AA00ENG.png)
|
1.Prepare the tyre and fix
the rim as usual.
|
![](../../../img/31/AC609533AC00ENG.png)
|
2.Put the tyre on the rim,
so that the cross point of the bead with the rim is
approximately
20 cm (A) away from the valve.
|
![](../../../img/31/ACF07534AB00ENG.png)
|
3.Engage the shoe and make
sure that 20 cm (A) is maintained between the cross point
and
the valve. The arrow shows the direction of rotation of
the wheel.
|
![](../../../img/31/AC609535AA00ENG.png)
|
4.Turn the wheel in order to
engage all the first side of the tyre.
note |
The standard shoes can pass
over the sensor without damaging it.
|
|
![](../../../img/31/AC609536AC00ENG.png)
|
5.Put the second side of the
tyre in position, so that the cross point of the bead with
the rim is approximately 20 cm (A) away from the valve. The
curved arrow shows the direction of
rotation of the wheel.
|
![](../../../img/31/AC609537AA00ENG.png)
|
6.Turn the wheel in order to
engage all of the second side of the tyre.
note |
The standard shoes can pass
over the sensor without damaging it.
|
|