REMOVAL AND INSTALLATION <2WD (except High rider)>


caution *: Indicates parts which should be temporarily tightened, and then fully tightened with the vehicle on the earth in an unladen condition.
Post-installation Operation
  • Check the Dust Cover for Cracks or Damage by Pushing it with Finger.
  • Front Wheel Alignment Check and Adjustment (Refer to ).




Removal steps


·
 Coil spring (Refer to ).


1.
 Lower arm ball joint
<<A>>
2.
 Lower arm adjusting bolt


3.
 Plate


4.
 Lower arm assembly

REMOVAL SERVICE POINT

<<A>> LOWER ARM ADJUSTING BOLT REMOVAL

After making a mating mark on the lower arm adjusting bolt, remove the lower arm adjusting bolt.