|
|
- Check the lower arm bushing
for wear and deterioration.
- Check the lower arm assembly for bend or
breakage.
- Check all bolts for condition and
straightness.
|
|
1.After shaking the ball
joint stud several times, use special tool preload socket
(MB990326)
to measure the starting torque of the ball joint.
| note |
Rotation starting torque
measurement should be carried out with parts
temperature above
0°C.
|
Standard value: 1.0 - 6.9
N·m
2.If the measured value is not
within the standard value, or if the ball joint is difficult
to turn or does not turn smoothly, replace the lower arm
assembly (Refer to  <2WD
(except
High rider)> or <2WD
(High rider), 4WD>).
|
|
|
1.Check the lower arm ball
joint dust cover for cracks or damage by pushing it with
your finger.
|
|
|
2.If the lower arm ball
joint dust cover is cracked or damaged, replace the lower
arm
assembly (Refer to <2WD
(except High rider)> or <2WD
(High rider), 4WD>).
| note |
If the dust cover is cracked
or damaged, it is possible that there may also
be damage
to the ball joint.
|
|